Sanicondens

Sanicondens

Condensate Pump  - 240,000 BTU - (Tubing and accessories included)

  • Suitable for a condensing boiler, HVAC systems, air conditioners
  • ↑ 15 Ft ↑ and/or ← 150 Ft →
  • Equipped with all necessary hardware for easy installation
$0.00

The Sanicondens is a small pump used to pump condensate from condensing boilers, HVAC systems, water heater systems, etc. The Sanicondens will pump condensate waste up to 15 feet in height and/or 150 feet away from a soil stack.

Condensate has the potential to cause property damage or even create health hazards...

See more

Sanicondens datasheet

Dimensions (Height x Width x Depth):

6 5/8" x 9 1/2" x 5 5/8"

Technical features of Sanicondens
Part number 040
Max. horizontal discharge 15 ft
Voltage 120 V
Frequency 60 Hz
Amperage 1.5 Amps (Max)
Motor 1/30 HP oil-filled thermally protected motor
Operating temperature 160°F Max
Power cord length 60 inches
Noise level (measured at 3 ft.) ≤ 44 dBA (Lp)
Discharge pipe diameter 3 ⁄ 8”
Discharge rate at 15 ft 30 GPH
Discharge rate at 3 ft 86 GPH
Normal running time 3-5 seconds (Short bursts)
Capacity 0.5 gallons / 1.9 liters
Inlets diameters 1” (top)
Type of activation Float/microswitch
Weight 7 lbs / 3.1 kg
Certifying agencies CSA (IPC, NSPC)