Saniswift Pro

Saniswift Pro

Residential/Commercial Heavy-Duty Gray Water Drain Pump -  1/3HP -  Easy Laundry Room Solution -  Laundry/Sink/Shower - HDPE Easy Access - Low inlets 

  • Easy access to major components while installed
  • ↑ 14 Ft ↑ and/or ← 140 Ft →
  • Low inlets for easy installation
  • CSA & IAPMO listed for nationwide compliance
  • Powerful, economical and compact design with 2" low inlets
$0.00

Your documents - Particular

The IAPMO listed Saniswift Pro drain pump is used to pump gray water away from a variety of both residential and commercial applications. The system is able to discharge the waste up to 14 feet vertical and/or 140 feet horizontal. This model is powerful and economical with a compact design and one 1.5" top...

See more

Saniswift Pro Data sheet

Dimensions (Height x Width x Depth):

9-3/4" x 12-1/4" x 11 1/4"

Technical features of Saniswift Pro
Part number 022
Max. horizontal discharge 14 ft
Max. vertical discharge 140 ft
Voltage 120 V
Frequency 60 Hz
Amperage 4.5 Amps (Max)
Motor 0.3 HP oil-filled thermally protected motor
Capacitor rating 30 microfarad
Operating temperature 140°F
Power cord length 48 inches
Noise level (measured at 3 ft.) ≤ 44 dBA (Lp)
Discharge pipe diameter 1” - 1–1/2”
Discharge rate at 15 ft @14 Ft : 18 GPM
Discharge rate at 3 ft 24 GPM
Shut-off head 25 ft
Normal running time 3-5 seconds (Short bursts)
Capacity 2.9 gallons / 11 liters
Inlets diameters 2” (sides)
Ventilation diameter 1-1/2" vent (top)
Type of activation Pressure switch/ circuit board
Shower/bath base height 6" min
Weight 16 lbs / 7.25 kg
Certifying agencies CSA (IPC, NSPC), IAPMO (UPC)

Complementary products

Descaler

Descaler

Descaler - 5 L Container for all Saniflo pumps by cleaning and disinfecting -...