Sanicondens Best Flat

Sanicondens Best Flat

2-in-1 low profile condensate pump which neutralizes and pumps away condensate.

  • Built-in neutralizer to raise pH levels for harsh HVAC applications
  • ↑ 15 Ft ↑ and/or ← 150 Ft →  
  • 500,000 BTU per hour
  • Equipped with all necessary hardware for easy installation

Dimensions l x w x h (in)

15 7/16" x 5 7/16" x 6 3/4"

$0.00


Application

  • Air conditioner
  • Boiler

Your documents - Particular

The Sanicondens Best Flat is a 2 in 1 condensate pump used to neutralize and pump condensate from condensing boilers, HVAC systems, water heater systems, etc. It is one of the most powerful and quiet condensate pumps on the market with standard features that no competitor can match. The Sanicondens Best Flat will...

See more

Sanicondens Best Flat Data sheet

Technical features of Sanicondens Best Flat
Application Neutralization systems
Part number 044
Max. horizontal discharge 15 ft
Max. vertical discharge 150 ft
Voltage 120 V
Frequency 60 Hz
Amperage 1.5 Amps (Max)
Motor 1/30 HP oil-filled thermally protected motor
Operating temperature 160°F Max
Power cord length 61–1/2 inches
Noise level (measured at 3 ft.) ≤ 44 dBA (Lp)
Discharge pipe diameter 3 ⁄ 8”
Discharge rate at 15 ft 30 GPH
Discharge rate at 3 ft 86 GPH
Normal running time 3-5 seconds (Short bursts)
Capacity 0.9 gallons / 3.4 liters
Inlets diameters 1” (top), 1” (side)
Type of activation Float/microswitch
Weight 12 lbs / 5.4 kg
Certifying agencies CSA (IPC, NSPC)
Boiler Capacity up to (BTU/hr) 500 000
Sanicondens Best Flat

Sanicondens Best Flat

  • Air conditioner
  • Boiler